big turbo big dawg style

[Dark Syde Racing]

[Fourbanger]

Nice. (Jealous) Same place I mounted my in-line fuse.

[srt-rex]

looks great, get her on the dyno!!!

[el_jefe]

Originally Posted by Dark Syde Racing

Whats with the middle finger when working on cars?

[gudeman00]

What turbo is it?

[svt2srt4]

Originally Posted by Dark Syde Racing

Question?...What is up with using the clear hose for the oil line for the turbo?..The clear hose shown in the pics is Kuritec K3150 beverage grade hose only rated to 70 degrees faranheit and 220psi. Is that sufficient for hot pressurized motor oil? The reason i ask is i have seen the same hose being ran on other cars at the track. It would seem to me to be pushing the limits of the hose.

[el_jefe]

Originally Posted by svt2srt4

Question?...What is up with using the clear hose for the oil line for the turbo?..The clear hose shown in the pics is Kuritec K3150 beverage grade hose only rated to 70 degrees faranheit and 220psi. Is that sufficient for hot pressurized motor oil? The reason i ask is i have seen the same hose being ran on other cars at the track. It would seem to me to be pushing the limits of the hose.

There are clear oil lines. You can get it at some autoparts store, especially the old school mom & pop places. I think I have some in my garage somewhere. . .

[svt2srt4]

Originally Posted by el_jefe

There are clear oil lines. You can get it at some autoparts store, especially the old school mom & pop places. I think I have some in my garage somewhere. . .

If its possible can you check the stuff in your garage for brand and mfg#'s and possibly the specs...I'm curious because we sell this hose at my work and if it will work i won't hesitate to use it...

[Dark Syde Racing]

that hose was purchased through greddy to test on the car.. it failed after a few high speed pulls... so we went to braided instead (melted around the clamp) however it was good to 400 deg. and 300psi according to greddy

[Dark Syde Racing]

here is a quick vid in action for all the guys who want to hear it spool at low boost
http://videos.streetfire.net/player....5-2D76DDEA2C9D

[svt2srt4]

Originally Posted by Dark Syde Racing

that hose was purchased through greddy to test on the car.. it failed after a few high speed pulls... so we went to braided instead (melted around the clamp) however it was good to 400 deg. and 300psi according to greddy

thanks for the info..and nice video, especially for driving and filming at the same time...

[Dark Syde Racing]

hey just to let you all know im having a GB offering to SRTSyndicate members only prices are in the buy/sell