Andrew’s (LittleTurboSRT) FYC Racing SRT-4 Build Thread -

[Stage2BlackSRT4]

FYC Racing Build

Some of the stuff in this list I have but its not yet installed and/or complete but is planned for this year

Specifications:
Dodge 2.4LT SRT4
E85 Fuel

Internal Block Modifications:
• .020 over Bore Wiseco Forged pistons
• DCR Eagle Rods- Machined for correct clearances for the proper wristpin fitment and Balanced
• Custom Spherical Dish Pistons
o -Machined Valve Pockets
o -Additional Accumulator Grooves
o -Additional Ring Land Grooves
o -Coated Piston Skirts, Includes Pins and Rings
• DCR Coated Rod and Main Bearing Set
• DCR set ring end gaps
• Nitrous safe wrist pins
• Crank Strap Kit
• Balance Chain Removal
• Balanced Rotating Assemble
• Weight Balanced internals

Oiling System Modifications:
• DCR Top End Oil Flow Modification/Restrictor
• DCR Oil Pump
• Big K&N Oil Filter
• DCR Big Pick Up Tube
• Ishihara-Johnson Windage Tray
• Ishihara-Johnson Upper and Lower Crank Scraper
• Ishihara-Johnson Oil Baffle
• Custom Hard Pipe Turbo Oil Return

Cooling System Modifications:
• SRT4 Visteon Racing Radiator with Single High Speed Fan
• 180 Degree Thermostat
• Purple Ice Additive
• 3" x 10" Coolant Overflow Bottle - Custom Mounted

Head Modifications:

• Full Race Port Job - FYC Racing
• Gasket Matched Intake - FYC Racing
• Gasket Matched Exhaust - FYC Racing
• Polished- FYC Racing
• DCR Custom +2 Stainless Exhaust Valves
• DCR Custom +1 Stainless Intake Valves
• DCR Custom Single Grove Valve Keepers
• BC Stage Three (3) Cams
• Fidanza Adjustable Cam gears
• BC Springs
• BC Single Grove Titanium Retainers
• FYC Racing 5 Layer Head Gasket
• DCR Manual Timing Belt Billet Tensioner
• DCR Head Stud Kit
• New OEM Valve Adjusters

Forced Induction System Modifications (Intake side):
• Garret GT3582R (.83 A/R ratio) - Exhaust housing Ceramic Coated Black
• JMB 4" Big Turbo Intake with 7” K&N Filter - Powder Coated Gloss Black
• Performance Autowerks Big Front Mount Intercooler 33”/12”/4”
• Rage-Tech Custom 2.5" Turbo Charge Pipe – Ceramic coated black
• 2.5" Lower Hot Side Hard Pipe - Powdercoated Black
• 2.5” Upper Hard Pipe - Red Silicon Couplings - Custom FYC Racing
• Silver Tial 50MM BOV
• Ported RPM Billet 68 MM Throttle Body - FYC Racing Ported
• JM Fabrications Custom SRT4 Sheet Metal Intake Manifold modified for direct Port Nitrous
• Boomba Racing Intake Manifold Spacer Gasket

Forced Induction System Modifications (Exhaust side):
• DNP Equal Length Tubular Exhaust Manifold - Ceramic Coated Black
• ARP Exhaust Studs and Nuts
• Rage-Tech Custom 2 in vband WG Open Air Dump Tube
• Rage-Tech Custom 2 in Vband WG relocate tube
• Rage-Tech Custom 3” O2 Housing - Wrapped with Exhaust wrap
• Rage-Tech Custom 3" DownPipe - Wrapped with Exhaust wrap
• Tial 44MM WasteGate with 1.4 bar spring
• Custom 4" Side Exhaust with 4" Oval Tip
• AGP Stainless Turbo Heat Shield

Fuel System Modifications:

• Full Blown Duel in Tank Fuel set up
• Duel 255 Walbro fuel Pumps
• Fuel System -10an (1/2") Stainless Braded Fuel Feed Line
• Fuel System -6an Stainless Braded Fuel Return Line
• Large -10an (1/2") High Flow External Fuel Filter
• Full Blown -10an (1/2") Fuel Rail
• 1550 CC Injectors (1550 CC output is @ 43psi Fuel Pressure)
• Fuel Return - 75psi Automotive Rising Rate Regulator

Nitrous Modifications:
• Controlled by AEM EMS:
• Zex Direct Port Nitrous kit with aprox 75 Shot
• Arming Switch's
• LED's for Arming Switch's
• Zex Bottle Heater
• Zex Nitrous Gauge
• Zex Nitrous Purge Kit
• Zex Nitrous Blow Down Tube
• Zex 10lb Bottle
• Billet Quick Release Nitrous Bottle Holder
• Switch's and LED's Mounted in Stock Radio Location - Custom FYC

Drive Train Modification:

DCR 3 speed drag AUTO Transmission
• Transmission Housing- Custom Brace and Gusset Welded for Pinion Support
• DCR 8” Converter- Based on Red Sled Research and Development, Custom Built
• DCR Front Pump- Signature Coated Pump Gears
• DCR Input Shaft- 904 Spline 300M Large Diameter
• DCR Custom Direct Piston- Increase in surface area for more apply
• DCR Custom Clutches- Direct Custom Clutch Pack with Friction Material
• DCR Custom Bands- Kevlar Friction Band Material
• DCR Custom Band Lever- 3.9 Ratio- 2nd Gear Apply
• DCR Custom Second Gear Servo- Solid Actuation Second Gear
• DCR 5 Pinion Planetary- Axles for Rollers and Cage Fully Welded
• DCR Reverse Strut- Increased Strength for Line Pressure
• DCR Custom Reverse Servo- Solid Actuation for Line Pressure
• DCR Thrust Washers- Signature Coated
• DCR Steel Sealing Rings- Install on Input Shaft, Servos and Pump
• DCR Custom Ring and Pinion- Large Diameter Pinion and Stronger Ring Gear
• DCR Custom Transfer Gears- 1.22 Transfer Gear Set
• DCR Gear Rem Polish
• DCR Custom Valve Body- Full Manual to Handle Line Pressure between 135-160psi
• DCR Custom LSD- Extreme Limited Slip Differential
• DCR Custom Spyder Gears- 3x Stronger than Stock
• DCR Axles- Driveshaft Shop Level 5 Automatic
• DCR B&M Shifter- Pro Ratchet
• DCR Transmission Cooler- Patented 9 Tube Multiflow
• DCR Transmission Mount- DCR Auto Mount
• O.E. Automatic Starter
• DCR 8-Bolt Flexplate
• DCR Custom Shift Cable Levers- Connection to B&M Pro Ratchet Shifter
• FTP Racing Solid Upper motor TQ mount/Strut – Powder Coated Gloss Black
• FTP Racing Solid Lower motor TQ mount/Strut - Powder Coated Gloss Black
• Modern Performance High Strength Motor Mount Bolt Kit for Mounts/ TQ struts
• DSS Stage Five (5) Axles
• Custom Frame to Trans Mount
• Power Steering Delete - Custom FYC Manual Steering Conversion

Safety Modifications:
• Custom Six (6) Point NHRA Spec Cage - FYC Racing
• Stock Seats Modified with OEM ACR Harness inserts and a fifth sub Harness point
• Five (5) Point Racing Harness -G-force: 3" wide straps, black, bolt in, cam locking, pull up.
• Fire Extinguisher

Suspension Modifications:

• Eibach Pro Spring Lowering Kit
• Mopar Front Strut Tower Brace Bar - Painted Gloss Black
• Tri-Point Rear Strut Tower Brace Bar
• Front PT Cruiser Sway Bar - 26mm
• Neon ACR Rear Sway Bar - 19MM
• SportMax 002 16x7 Rims - 16lb - Gloss Black with Polished Lip
• 225/45/16 - Hankook Ventus R-S2- Street Tires
• Energy Suspension LCA Bushings
• Energy Suspension Rear Control Arm Bushings
• Energy Suspension Front End Links
• Energy Suspension Rear End Links
• FTP Racing Traction Bars
• FTP Racing Chassis Brace
• Performance Autowerks Big Front Mount Crash Brace Bar – Painted Black

Ignition system Modifications:
• Magnicore 8.5mm Wires - Red
• NKG Idrinum 2-step colder plugs - Gapped to .025

Vacuum System Modifications:
• Stock Vacuum lines removed or rerouted - FYC Racing
• Stock solenoids removed - FYC Racing
• PVC System Check Valve - FYC Racing
• Valve Cover Breather and Filter

Electronic Tuning Modifications:
• AEM EMS Standalone Computer
• AEM EMS Boost Solenoid
• AEM EMS 3.5 Bar Map Sensor
• AEM EMS EGT Sensor
• AEM EMS Oil pressure Sensor
• Rage Tech AEM EMS Map Sensor Map Adaptor
• N2MB Boost by Gear Electronic Boost Controller

Electrical Modifications:
• Custom duel relay wiring set up for duel fuel pump system (controlled by AEM EMS) - FYC Racing
• Battery moved to trunk (2-gage wire, 60 amp breaker, Custom under-hood Distributing Blocks, Taylor Stainless battery box ) - FYC Racing
• Custom FYC Relay Mount/Distribution Block

Gauges and other in Cabin Monitoring Electronics:

• AEM EMS Serial Gauge
• VEI Systems Electronic Boost gauge - Red LED display
• AEM EMS Wideband O2 gauge - Red LED display
• Valentine One Radar Detector with Hideaway Display
• Autometer Oil Pressure Gauge

Visual Interior Modifications:
• Blue Led Dash LEDS
• Blue Led Climate control LEDS
• Perrin Universal Column Mount Dual Gauge Pod
• B&M Shift knob
• Color matched upper trim

Visual Exterior Modifications:
• Grip Tuning Stainless Steel Hood
• CTI Black Housing Headlights
• Silver Star (blue glass) Turn Bulb's
• Hard Fiberglass Eye lids - Painted To Match Custom Color
• Fog Lights Deleted
• Blacked out Clear Corners
• Depo LED black Taillights
• Antenna Delete
• All Stock Badges Removed
• 30% Tint
• Front Fender Flares

Visual Under Hood Modifications:
• Powder Coated Radiator Brackets - Gloss Red
• Redline Racing Hood Lift Kit - Brackets Powder Coated Gloss Red
• Powder Coated Valve cover - Gloss Black
• Powder Coated Upper Thermostat Housing - Gloss Black
• Powder Coated Lower thermo Housing - Gloss Black
• Custom FYC Trani Mount/Brackets
• Gloss Red Engraved Billet Radiator cap
• Gloss Red Engraved Billet Brake Fluid Cap,
• Gloss Red Engraved Billet Oil Cap
• Gloss Red Engraved Billet Dip Stick
• Washer Bottle Deleted/Removed
• A/C Deleted

Supporting Modifications and MISC:

• Passenger Side Air Bag Deleted
• BWOODY Oil Catch Can - Powder Coated Gloss Black
• T-bolt Clamps on all Turbo Piping
• Twin Hella Super Horn’s
• Misc Custom Motor Brackets - Chopped to remove unneeded support

[Stage2BlackSRT4]

DCR Option A parts in the mail a week or so ago

[Stage2BlackSRT4]

GT3582R with 4 inch inlet and 2 1/2 inch outlet.

[Y4L]

^ me likey the new toy andrew, i cant wait to see that beast in action

[Stage2BlackSRT4]

Few parts I got last week:

DCR 5 layer head gasket:



DCR Manual Timing Belt Tensioner:



DCR Head Stud Kit:

[Stage2BlackSRT4]

More stuff in today (OEM)

5093452AA lower gasket package (including oil pan gaskets)
5101787AB upper gasket kit
Timing belt TB000265
6503387 Main bolts (X10)
6504257 Bedplate bolts (X10)
4884159AA OEM Water pump

AC Delete Package

I ended up with some extra gaskets to sell later or keep for a rainy day (Head gasket, oil pan gasket and IM gasket

[Stage2BlackSRT4]

More parts


JMB 4" intake powdercoated gloss black with clearcoat:





Brain Crower (BC) Springs and titanium retainers



Fidanza cam gears:

[Plan B]

Brian Crowers!?!?!?.... Just kidding. Thing's gonna be a beast!

[LittleTurboSRT]

DCR Custom +1 Intake Valves





DCR Custom +2 Exhaust Valves



DCR Custom Valve Keepers


Rage Tech - 3.5 Bar AEM Sensor adapter (so you can mount in stock location):

[LittleTurboSRT]

AEM EMS

[Plan B]

Now that's uppin yo game!

[Y4L]

O NICE!!! BTW andrew i knew what was in the box with it lol i just did not wanna tell you should go buy some thing other then cars parts like porn with it

[LittleTurboSRT]

Fro-G head porting has started....

Before pictures:






Started:


I will update later with more pictures as it gets closer to being done






New FMIC next to the old direct fit 3.5" ETS